☰
✕
Home
Mock Test
State PCS
Railway
SSC
HSSC
DSSSB
RO/ARO
UPSC
HSSC SO/JE/AM Civil & Electrical Group-1 (18-02-2024)
📆 October 24, 2024
Total Questions: 100
41.
What type of mortar can be used in unimportant buildings made of bricks?
(a) Cement mortar
(b) Line mortar
(c) Mud mortar
(d) Epoxy mortar
(e) Unattempted
Correct Answer:
(c) Mud mortar
42.
Which type of angle is greater than 180°?
(a) Acute angle
(b) Right angle
(c) Obtuse angle
(d) Reflex angle
(e) Unattempted
Correct Answer:
(d) Reflex angle
43.
Which branch of surveying deals with measurements in a vertical plane?
(a) Levelling
(b) Plane surveying
(c) Geodetic surveying
(d) Topographical surveying
(e) Unattempted
Correct Answer:
(a) Levelling
44.
How are trees classified based on mode of growth?
(a) Grade and elasticity
(b) Perpendicular and parallel
(c) Endogenous and exogenous
(d) Small and large
(e) Unattempted
Correct Answer:
(c) Endogenous and exogenous
45.
The concept of the Chandigarh city is based on four major functions. Which among the following is not one among them?
(a) Living
(b) Peace
(c) Working
(d) Care of the body
(e) Unattempted
Correct Answer:
(b) Peace
46.
Which type of paint contains oil, a strong dyer, lead or zinc chrome, and finely ground sand?
(a) Oil paint
(b) Enamel paint
(c) Synthetic rubber paint
(d) Anti-corrosive paint
(e) Unattempted
Correct Answer:
(d) Anti-corrosive paint
47.
Which type of cement is produced by grinding clinkers of cement with about 60 to 65 percent of slag?
(a) Rapid Hardening Cement
(b) Coloured Cement
(c) High Alumina Cement
(d) Blast Furnace Cement
(e) Unattempted
Correct Answer:
(d) Blast Furnace Cement
48.
Which of the following is a commonly used base for paints?
(a) Linseed oil
(b) Tung oil
(c) Zinc oxide
(d) Lamp black
(e) Unattempted
Correct Answer:
(c) Zinc oxide
49.
The ‘National Youth Day’ in India is observed on:
(a) 8th September
(b) 12th January
(c) 24th January
(d) 15th January
(e) Unattempted
Correct Answer:
(b) 12th January
50.
The slenderness ratio of a wall is defined as:
(a) The ratio of its length to width
(b) The ratio of its height to width
(c) The ratio of its effective length or height to thickness
(d) The ratio of its volume to weight
(e) Unattempted
Correct Answer:
(c) The ratio of its effective length or height to thickness
Submit Quiz
« Previous
1
2
3
4
5
6
7
8
9
10
Next »
« Previous Post
Next Post »
Related Posts
CHEMISTRY (Part-V) (Railway)
Conductivity
Optics part (1)
Heat and Thermodynamics part-(1)
Electric current – part (2)
Space Part-2
