HSSC Work Supervisor (14-01-2024)Total Questions: 10021. What is the main purpose of varnish?(a) To color surfaces(b) To protect surfaces from damage(c) To provide a matte finish(d) To provide a shiny finish(e) UnattemptedCorrect Answer: (b) To protect surfaces from damage22. What is the angle between the three mutually perpendicular edges of a cube in an isometric drawing?(a) 90°(b) 120°(c) 180°(d) 360°(e) UnattemptedCorrect Answer: (b) 120°23. The machine parts of the computer are called:(a) Software(b) Hardware(c) Bits(d) Data(e) UnattemptedCorrect Answer: (b) Hardware24. __________ are saprophytic protists.(a) Dinoflagellates(b) Euglenoids(c) Protozoans(d) Slime moulds(e) UnattemptedCorrect Answer: (d) Slime moulds25. Size of concrete cube for compression test is:(a) 100 x 100 x 100 mm(b) 150 x 150 x 150 mm(c) 150 x 100 x 100 mm(d) 120 x 120 x 120 mm(e) UnattemptedCorrect Answer: (b) 150 x 150 x 150 mm26. What is the function of hydraulic fluid in an excavator?(a) It powers the cab and rotates the house(b) It moves the undercarriage(c) It lifts and lowers the boom and bucket(d) It controls the excavator's steering(e) UnattemptedCorrect Answer: (c) It lifts and lowers the boom and bucket27. __________ are end supports of the superstructure of a bridge.(a) Wing-walls(b) Piers(c) Approaches(d) Abutments(e) UnattemptedCorrect Answer: (d) Abutments28. Unit of measurement of Damp proof course is:(a) m(b) sq.m(c) kg(d) cu.m(e) UnattemptedCorrect Answer: (b) sq.m29. What is the angle between the two cutting lips of a twist drill?(a) 90°(b) 100°(c) 118°(d) 135°(e) UnattemptedCorrect Answer: (c) 118°30. Manav Rachna International University of Haryana was earlier called as:(a) Kurukshetra Institute of Technology(b) National Institute of Technology(c) Career Institute of Technology and Management(d) Lingaya's University(e) UnattemptedCorrect Answer: (c) Career Institute of Technology and ManagementSubmit Quiz« Previous12345678910Next »
