SSC-Junior Engineer (Civil & Structural) Online Exam 2018 (Part-III)Total Questions: 4031. If the fluid is ideal as per assumptions of Bernoullis theorem, it means that:A. velocity is zeroB. flow is constantC. viscosity is zeroD. pressure is constantCorrect Answer: C. viscosity is zero32. The ratio of stress induced due to sudden applied axial load to stress induced due to gradually applied axial load on a bar is ________.A. 2B. 3C. 1.5D. 2.5Correct Answer: A. 233. If B = 100 days and D = 1400 hectares/cumec, then find delta.A. 51.71 cmB. 55.71 cmC. 61.71 cmD. 65.71 cmCorrect Answer: C. 61.71 cm34. When bitumen is allowed to penetrate to full depth of stone layer it is called:A. semi groutB. half groutC. full groutD. full chippingCorrect Answer: C. full grout35. Which IS code provides recommended guidelines for concrete mix design?A. IS 12813B. IS 1373C. IS 10262D. IS 800Correct Answer: C. IS 1026236. The minimum cover for an RCC column should be:A. greater of 25 mm or diameterB. greater of 40 mm or diameterC. greater of 30 mm or diameterD. greater of 50 mm or diameterCorrect Answer: B. greater of 40 mm or diameter37. The length of a transition curve depends on the rate of change of ________.A. centrifugal accelerationB. tangential accelerationC. distanceD. speedCorrect Answer: A. centrifugal acceleration38. Which vibrator is used for vibrating concrete cubes?A. Internal vibratorB. Table vibratorC. Platform vibratorD. Surface vibratorCorrect Answer: B. Table vibrator39. The chemical formula for lime is:A. CaOB. Ca₂O₃C. CaO₂D. CaCO₃Correct Answer: A. CaO40. For stopping sight distance the eye level should be at:A. 1.6 mB. 1.2 mC. 0.75 mD. 1.8 mCorrect Answer: B. 1.2 mSubmit Quiz« Previous1234
