SSC-JUNIOR ENGINEERING (CIVIL & STRUCTURAL) EXAM 2015 (Part-III)

Total Questions: 50

41. In order to determine the allowable stress in axial compression, Indian Standard Institution has adopted:

Correct Answer: A. Secant formula
Solution:No explanation given in the book

42. The total length of a cranked bar through a distance (d) at 45° in case of a beam of effective length L and depth (d) is:

Correct Answer: C. L + 2 × 0.42d
Solution:No explanation given in the book

43. The intensity of direct longitudinal stress in the cross section at any point distant r from the neutral axis, is proportional to:

Correct Answer: A. r
Solution:No explanation given in the book

44. Creep of a material is:

Correct Answer: D. continued deformation with time under sustained loading
Solution:No explanation given in the book

45. Shrinkage in concrete increases its:

Correct Answer: C. bond strength
Solution:No explanation given in the book

46. The fillet weld whose axis is parallel to the direction of the applied load is known as:

Correct Answer: B. side fillet weld
Solution:No explanation given in the book

47. The thickness of the flange of a Tee beam of a ribbed slab is assumed as:

Correct Answer: C. thickness of the concrete topping
Solution:No explanation given in the book

48. An estimate is:

Correct Answer: C. probable cost arrived at before construction
Solution:No explanation given in the book

49. The width of having bars in mm is kept?

Correct Answer: C. thrice the nominal rivet diameter
Solution:No explanation given in the book

50. The specific speed of a pump is defined as the speed of a unit of such a size that it discharges:

Correct Answer: A. unit discharge at unit head
Solution:No explanation given in the book